Slab doors – Page 14

Slab doors are a type of interior door that consists of a single wood panel. Unlike pre-hung doors, which come with a frame and hinges, slab doors are sold as standalone panels. They require separate hardware installation, including hinges, doorknobs or handles, and a latch or lock mechanism.

To hang a slab door:

1. Measure and trim the door if needed.
2. Mark hinge locations on the door and create recesses with a chisel.
3. Attach hinges to the door frame.
4. Install the doorknob/handle set and latch/lock mechanism.
5. Position the door in the opening and check alignment with a level.
6. Screw the hinges onto the door frame.
7. Test the door's movement and ensure proper latching/locking.

The cost of installing a slab door depends on several factors, such as the size, material, quality, and location of the door, as well as the labor and supplies required. The average cost of installing a slab door ranges from $120 to $400, but it can vary depending on the specifics of your project.

Slab doors typically do not come with pre-cut hinge recesses or cutouts. However, you can easily cut the hinge recesses yourself using a chisel and a mallet or hammer.T o cut hinge recesses in a slab door:

1. Measure and mark hinge locations on the door edge.
2. Score the outline of the hinge with a utility knife or chisel.
3. Use a chisel and hammer to gradually remove wood within the marked area.
4. Clean up the recess and ensure a smooth surface.
5. Test the hinge fit and make adjustments if needed.
6. Repeat for other hinge locations.